Can Blackout Curtains Be Hemmed & Dyed?

Blackout curtains come in a variety of colors and sizes, so it might be difficult to discover exactly what you’re looking for. If everything isn’t the same color, you might have to dye it a different color or cut it a little off here and there.

Can Blackout Curtains Be Hemmed & Dyed?

Blackout curtains need to be hemmed. The edges of ready-made blackout curtains are already hemmed. It’s also possible to sew and tuck the edges of blackout curtains that you make from scratch at home. Some of them don’t even need to be sewn. To keep the edges from fraying, you should hem them.

How do you hem blackout curtains so that they fit?

Hemming a curtain should be a piece of cake if you know how to operate a sewing machine. Just by following a few important but simple steps, they will look like they were done by a professional. All that is required are the appropriate tools and skills.

Measure the curtain:

When you start, you need to measure the curtains. In this case, there is enough fabric to make a double folded hem, because curtain hems are folded two times at the bottom.

Fold the bottom:

In this case, put your curtain on a flat surface with the opposite side facing outward on top. Now, depending on the width of the hem you choose, fold the bottom up and flatten it with an iron.

Flatten using an iron:

Now fold your hem in the same way as the previous stage and iron it to make it flat.


Try to find a thread that goes with your curtain. Sew as close together as you can to complete the hem. The bottom of your curtains should now be hemmed, so they should look nice.

Can blackout curtains be hemmed using hemming tape?

If you have fusible hemming tape on hand, you can use it to make the hem of a blackout curtain quickly at home. In this way, you don’t have to sew two pieces of fabric together, which is a lot of work.

How do you stitch a hem on blackout curtains?

It doesn’t matter if you don’t know how to sew or have a sewing machine. You can still hem your blackout curtains. A more affordable and long-lasting solution is to use fusible hemming tape. This item can be found almost anywhere, from a craft store to online stores like Amazon and eBay.

Folding the curtain:

You can fold the curtains to the length you want. To keep it folded, you may use straight pins.

Fold ironing:

The folded portion may now be ironed to produce a distinct crease where the hem will be.

Open the fold:

Start by taking out all of your pins and folding the fabric in half. Then, start to line up the seam tape on top of the crease in a straight direction. Your blackout curtains’ thickness and length will determine how many lines of tape you need.

Fold over the tape:

The hem should now be folded over the tape. To clean your curtain, use a wet washcloth and place it on top of the curtain rod.

Press iron:

After you’ve placed the washcloth on top of the curtain, you’ll want to iron it for 10 seconds straight without moving it at all. You may do the same for the remainder of the piece.

Finally, your blackout curtains have been hemmed and are ready to hang.

How do you hem curtains that have a blackout lining?

There are a few more steps when you have to hem curtains when you buy the blackout curtain and liner separately, but it’s worth the extra time. As long as you get what you pay for in the long run.

Determine the fabric’s width:

Always remember to take accurate measurements and cut your fabric. If your hem is going to be longer or wider than your final curtain, add a few additional inches to your curtain measurements before cutting it out.

Fold and then iron:

The hem should be folded and ironed. Tuck the blackout lining under the hem and attach it with pins.

Sew the hem together:

Sew the hem carefully now, ensuring that the lining is snugly tucked inside to prevent it from slipping out after you have sewed over that section.

It won’t work to just hem the bottom of the dress with the liner if there aren’t three other sides tucked and sewn in.

Is it possible to stain blackout curtains?

You may dye your blackout curtains if they are white, off-white, cream, or any light hue. This can’t be done with a dark curtain. There are a lot of ways to make the dark curtains even darker, but the final result could be a mix of the dyed color as well as the color of the curtains.

How do you color blackout curtains?

Changing the color of your blackout curtains is as simple as dyeing them in the color of your choosing. As long you have the correct colors and know how to apply them.

curtains in light colors:

Start with a curtain that isn’t too dark, because these are the ones that can take the color the best.

Choose the color that you like best:

Purchase your preferred fabric dye. You may need to use many colors or bottles to get the desired effect.

Add water to the washing machine:

Provide enough hot water in your washing machine for the curtains to be soaked completely while yet allowing them to move freely.

Add a little bit of dye:

Add the fabric dye to the hot water as directed on the package. Dip the curtains completely in the water.

Leave the curtain open:

To produce the most bright and opaque color and minimize fading, keep the curtains in the dye solution for at least 30 minutes before washing and drying.

How do you color blackout polyester curtains?

A chemical dye called dispersion is needed to color polyester blackout curtains. Natural dyes can’t do this because they don’t work with polyester. This can be done at home with a few simple steps.

Chemically clean the curtains:

To prepare polyester curtains for dyeing, wash them in hot water with soda ash or sodium carbonate and Synthrapol.

Get the curtain wet:

To make sure the curtains are submerged, put enough water in a pot to cover them completely. Add the dye as well as the dye carrier product, if needed.

Warm up the water pot:

Add the curtains to the dye bath when the pot has reached a simmer over medium heat. The dye should be stirred for at least 30 minutes, and up to 60 minutes if the dye is very black.

Warm-up some clean water:

In another pot, heat some clean water. Then, take the curtains out of the dye bath and put them in the new pot. Rinse with fresh water until no extra color leaks through and the colored curtains have no lasting odor.

Dry them:

After that, you may wash and dry them in the dryer or in direct sunshine to complete the process.

Can you hire a professional to color your blackout curtains?

Depending on the shop, you may be able to have your blackout curtains professionally dyed in whatever design or color you like. You may either bring your curtains or pick from their extensive collection of blackout curtains in a variety of materials and colors.

Is it possible to make curtains blackout?

If you want to keep out light and noise, you can make your curtains blackout curtains. Add a blackout lining to the curtains you’re presently using and you’ll be good to go.

There are two ways to do this: You can hang a blackout liner around your curtains and a wall, or you can sew a blackout liner to the back of your curtains with fabric fuse as well as hemming tape.

Is it necessary to hem blackout lining?

If you want to separate the blackout lining from the curtains and hang them on their own, they need to be hemmed like usual curtains.

It’s also possible that you want to sew the lining to your curtains. To do this, fold the curtains in half and sew them together, then tuck the lining inside. When you do this, you don’t have to make the lining hemmed.

Blackout curtain hem – How many inches should be?

If you want to block out all the light and sound, then blackout curtains are likely to be longer and reach the floor.

As a result, their hems should be around five inches long to seem proportional. For medium-length blackout curtains, a 3 to 4-inch hem is good, while for short ones, 2 inches would be enough.

Is it possible to bleach blackout curtains?

Blackout curtains may be bleached. Clean any stains on your blackout curtains at home if you want to save money. Simple home bleach or hydrogen peroxide 3% is all you need to quickly bleach anything in minutes.

Can you color rubber-backed blackout curtains?

Rubber-backed blackout curtains may be colored since the most crucial factor to consider is the curtain’s substance and its ability to absorb the dye. Rayon, cotton, linen, and silk are all materials that can be dyed very well. Synthetic, on the other hand, can’t be dyed.

It’s also possible that older curtains won’t be able to take the dye well, making them look uneven and patchy. This is because they are older and in poor shape.

To move blackout curtains, you need a huge amount of energy and muscle. You can hem as well as dye them at the house to make them look better.

There’s no need to worry about how long, thick, or hard your blackout currents are as long as you take the right steps and then use the suitable tapes and dyes.