Have you purchased a bar stool that isn’t long enough for your table? Sitting too low at a bar may be rather unpleasant and embarrassing.
Because you can’t change the height of the bars, the greatest thing you can do is raise the bar stool. So, let’s have a look at how you may raise the height of your bar stools.
Table of Contents
How can I make a bar stool taller?
A bar stool may be made higher in several ways. Screwing in legs, installing seat cushions, and connecting casters are all options. Leg extenders, either homemade or commercial, may also be used to boost the seat’s height. At a high table, you may dine and drink better by raising a bar stool.
You may use any of the options offered to raise the barstool to the proper height. Leg extenders may be used to raise the height of any piece of furniture.
As a result, you’ll have to choose a technique based on the quality of the stools and your preferences.
There are three different techniques to make a bar stool higher.
Putting together your furniture leg extenders
One of the most cost-effective as well as practical methods to increase the height of bar stools is to use DIY furniture leg extenders.
This is how you can use DIY leg extenders to make a bar stool taller:
Decide how much you wish to grow in height:
Measure the distance between the bottom of the stool’s crossbars and the height you want the bar stool seat to rise to.
The extenders are positioned on top of the crossbars. As a result, this method will only work if your stool has crossbars.
Measure the length of the extenders you’ll need:
Measure the distance from the floor to the lowest edge of the crossbars. Now deduct the required height from the measurement taken from the floor to the seat of the stool.
The length of your PVC pipe leg extenders will be determined by adding the difference to the distance between the bottom edge of the crossbars and the floor.
Cut the PVC pipe as follows:
Using a hacksaw, cut four PVC pipes to the length specified in step 2. To ensure that the barstool sits level, keep the surface flat and equal during cutting.
Attach the pipes to the stools’ legs as follows:
Finally, place a cut pipe on each of the stool legs and press it against the crossbars.
Leg extenders may be bought and used to lengthen the legs of your furniture.
You can easily increase the height of your bar stool by installing bought leg extenders. Let’s take a closer look at how to use these extenders.
Assemble the leg extenders by following these steps:
To begin, unbox the leg extenders and follow the manufacturer’s directions for assembly.
Inside the leg extenders, place spacer pieces:
The height is progressively increased by the spacer pieces. Place the same number of spacer pieces in each leg extender if the leg extenders you ordered provide this option.
To attach the leg extenders to the stool, do the following:
Invert the bar stool and place one leg extender on each leg. Make sure the extenders don’t slip off by doing it correctly.
Adding a cushion to the seat
A high-quality seat cushion with cotton padding aids in getting out of the chair and adds a layer of softness to the surface for comfort.
Replacing or adding a seat cushion is the simplest and safest way to adjust the height of a bar stool.
Take out the old cushion:
Most barstools feature cushions that may be removed. Remove the cushion gently if this option is offered for your device.
Place the seat cushion in place:
Now, in the seat, place a seat cushion that is the right size for you. A seat cover may be used to hide an inappropriate color combination.
What should the height of my bar stools be?
There are many different styles of bar stools on the market. Backless bar stools, bar stools with armrests, swivel bar stools, and upholstered bar stools are all included.
The height difference between the counter and the stool, regardless of the style of barstool you have, should be about 12 inches. If your countertops are between 41 and 43 inches high, your bar stools should be between 29 and 32 inches high.
What is the height of extra-tall bar stools?
The extra-tall bar stools, as the name indicates, are taller than regular bar stools. The majority of these stools are found in bars and pubs with unique countertop heights.
The height of most exceptionally tall bar stools is 33 to 36 inches, measured from the floor to the seat. These stools are designed for counter heights of 44 to 47 inches.
The extra-tall bar stools, on the other hand, may reach a height of 40 inches. Because of their unusual length, they are also known as spectator-height stools.
For a 42-inch bar, how tall should bar stools be?
The most frequent and typical height for bar countertops is 42 inches. The height of the stool should be roughly 12 inches lower than the counter for comfortable seating. So, for 42-inch bars, the stool bar should be 29 to 32 inches in height.
Is it possible to make bar stools shorter?
You will be able to make your bar stool lower if it is higher than the needed height. By eliminating the additional length from the legs, you may simply lower the stool’s height.
If your bar stool includes a hydraulic height adjustment option, you may simply pull a lever up to make it shorter.
What is the best way to lower bar stools?
In a few easy actions, you may lower the hydraulic or adjustable bar stool. The procedure is so basic that it will take you less than a minute to complete. Here’s how to make bar stools lower:
Decide on the length you wish to shorten:
First and foremost, choose the ideal stool height. Now, using a measuring tape, determine the height from the ground.
Locate the lever under the seat:
Hydraulic bar stools are equipped with a lever that allows you to adjust the seat height.
Using the lever, lower the seat:
Place your feet on the stools’ seats first, then lift the lever upwards until you reach the desired height. By getting out of your seat and pushing the lever up again, you may alter the length.
How can you shorten a metal bar stool?
The majority of metal bar stool legs are hollow and tubular metal, both of which are quite simple to cut. However, you’ll need to do it with extreme care to ensure that it’s level and comfortable to sit on.
Let’s have a look at the steps involved in shortening a metal bar stool:
Place the stool on a flat area as follows:
To begin, set the bar stool on a level, flat surface so that you can cut it evenly. In addition, secure the table’s legs to make cutting more convenient.
Remove the metal legs as follows:
Cut the legs using a hacksaw. You should not move the saw back and forth while sawing. Make sure your strokes are lengthy and even.
Make the ends of the legs smooth:
At times, hacksaw cuts might be inconsistent. So, once you’ve chopped the legs of the barstool, sand the ends of the legs.
What’s the difference between bar and counter height?
Because a counter table is primarily used for dining, it is often shorter in height than bar tables.
The standard counter height is 34 to 36 inches, while the bar height is 40 to 42 inches. However, the precise measurement differs from one manufacturer to the next.
Making the bar stool higher is a straightforward operation that you may do without much difficulty. Making a bar stool higher will provide a nice and comfortable sitting experience at the bar counter.