If you spend a lot of time in your kitchen, anti-scald faucets are essential. It protects from hot water sprays.
Families that have children and old people need anti-scald faucets because their skin is sensitive and it can be hard for them to use the faucet handles.
But why are they required? This is a question that may be bothering you. Let’s find out.
Why Kitchen Faucets have Anti Scald?
The potential for prompt hot water release is present in typical kitchen faucets with one handle. As a result, it may seriously burn the skin. The Anti-Scald feature avoid this prompt discharge as well as maintain a consistent water temperature. As a result, it protects you from major damage.
Why do kitchen faucets include anti-scald features?
You must follow certain safety protocols wherever you work. Valves with anti-scald play an important part in your safety. So, let’s dig a little deeper.
Maintain a consistent temperature in the water
Feeling changes in the temperature of the water while working is quite irritating.
A simple example will make things easier for you. Reduced cold water pressure occurs in the pipe when one member of your household is having a shower using cold water.
If you use the kitchen faucet at that same time, a burst of hot temperature water will hit you, causing serious injury.
Because children’s skin is so delicate, they are most harmed by this quick drop in water temperature.
Even if the temperature in the water pipes changes, anti-scald valves keep a stable water temperature.
People who have serious health problems
A person undergoing chemotherapy or suffering from serious health difficulties should have valves with anti-scald feature installed in their home. Excessive heat makes these patients vulnerable to legionnaires’ illness.
Ensure more security
Any adult with sensitive skin may be impacted even by the smallest amount of heat. It is advised to have a strong method to ensure their safety since you can’t be there anytime they come to the kitchen.
Because you are often in the kitchen, there is a great risk of being burnt by a sudden from hot water surge.
Isn’t that a dreadful experience? Valves with anti-scald are crucial in this situation.
Families with little children
Every year, around 2000 children in the United States are burnt because their homes lack faucets with anti-scald. Most of these accidents happen in their kitchen or bathroom, which is interesting. Anti-scalds are very important here because they keep kids from getting burned.
Protects against expensive therapy
According to statistics, this is also the cause of 20% of all burns. These kinds of burns need costly skin procedures.
These burns often need skin grafting or plastic surgery. So, cheap anti-scalds are a better option.
It’s more practical to use anti-scald. Unlike single-handled versions, it is no need to mix cold and hot water manually to achieve the desired temperature. All process works automatically here.
Patients with dementia
Dementia is a health disorder in which individuals lose track of important facts and are unable to make sound judgments.
As a result, individuals are more likely to get burnt while using the kitchen faucet since they may fail to combine the hot and cold water. As a result, anti-scalds feature is required.
Better security while maintaining the same appearance
Don’t be concerned about your appearance! The best news is that installing anti-scald will not change the appearance of the kitchen faucet.
Because this kind of valves are fitted with innovative piston mechanisms that maintain a balance right between cold and hot water, they will offer you enhanced safety while maintaining the same appearance.
Before using their kitchen faucet, no one constantly checks the water temperature.
One reason for this is that someone who uses the faucet often over time becomes adept at dealing with changes in both pressure and temperature.
However, another individual may suffer a 1st-degree burn from the same water temperature.
Nobody is superhuman here; everybody who is used to a certain temperature will get shocked if the temperature climbs up to 140° F suddenly.
For that, don’t compromise your safety.
What exactly is an anti-scald valve?
On layman’s terms, they are also known as ‘anti-burn’ valves. If you need to get technical, you may call them pressure-balance featured valves.
In the pipelines that carry cold and hot water, unexpected pressure shifts might occur.
Valves with anti-scald maintain a consistent water temperature by balancing the temperature and preventing any rapid temperature changes.
How do scald guards function?
These scald guards are so well-designed that they can detect the water and air temperature precisely.
The capability of setting a temperature threshold limit is available on all scald guards. They also preserve water to maintain a stable temperature.
Once the temperature in the pipeline hits that limit, this valve shut off the stream of hot temperature water and start providing cold water.
The scald guards prevent lines from overheating in this manner. The water temperature returns to normal after a specific duration, and the valves shut off the water flow.
To avert a repeat disaster, the valves begin to save water once again. That is the way of machine works.
Is anti-scald valves required?
The answer is yes. You must have one in the kitchen for your safety.
Lots of reports say that people get very bad burns because their kitchen faucets don’t have valves with anti-scald.
The water temperature might vary at any moment, causing major skin damage. Put one at the faucet and enjoy a stress-free life.
What is the best way to tell whether my kitchen faucet is anti-scald?
When you’re purchasing a new home or moving, you’ve undoubtedly asked yourself this question. So, using a tiny technique, I’ll fix this issue for you.
The method is straightforward. Consult a technician for help.
Just be aware if you’re purchasing or moving into an older home, be cautious since most older homes lack scald valves.
Valves with Anti-scald are now required in all houses under new building regulations.
So, if you’re relying on an old property, consult a professional. Don’t risk your safety.
How do you adjust a scald-proof faucet?
A faucet with scald-guard may be readily adjusted using the two techniques below:
Step 1: Remove the faucet’s handle.
You must go to the valves to modify the temperature settings. To do so, remove the outside handle first. The valves are then accessible. Start by removing some of the interior parts now.
Remember to remove the components in the correct sequence. Otherwise, you’ll be stuck putting it back together.
Step 2: Replace the valve.
You could see the valve now that you’ve removed all of the inside components. Check the numerals at the valve top, which shows the temperature levels, carefully.
Switch the circular-form gear on if you don’t see the temperature levels. The water movement will be shown together with the water temperature level indicator. After you’ve gathered all of the information, adjust the temperature to your liking and remain safe.
How do you set the anti-scald valve on a Moen faucet?
If you have anti-scald valves from Moen but the water flow is excessively hot, you may simply change it by following the procedures below.
Step 1: To begin, detach the handle. The Temperatures Limit Stop (TLS) will appear.
Step 2: Take out the TLS and rotate it clock-wise.
Step 3: Replace TLS in its original location and begin the water flow.
If you’re not obtaining the results you want, repeat the procedure. Once you’ve achieved your desired result, just reinstall the handle and you’re ready to go.
How do you modify the anti-scald valve in Glacier Bay?
When you have a faucet from Glacier Bay but having trouble adjusting the temperature, let us work together to address the problem.
Step 1: To access the internals, just detach the exterior handles and every outside piece.
Step 2: On the valve, you’ll find a red-colored copper control pin with operand signs that indicate cold and hot water separately.
Step 3: Move the control pin to the positive side if you wish to raise the water temperature. Just follow the opposite direction to lower the temperature.
Step 4: Don’t forget to return all of the internal components and external parts to their proper locations.
What is the procedure for adjusting the anti-scald setting on a Delta faucet?
Delta faucets’ valves with anti-scald may be simply adjusted by following seven simple steps.
Step 1: Locate the set-screw opening on the faucet’s side. Rotate the screw (anti-clockwise) using a hex key to remove the handle.
Step 2: With a gentle tug, remove the faucet cartridge.
Step 3: Remove the little disk made of plastic that is attached to the stem of the faucet to expose the scald guard.
Step 4: Always read the directions on its scald guard since they will tell you how to alter the water temperature.
Step 5: Release the scald protection out from the cartridges to raise or reduce the water pressure. When you want to raise the pressure, turn anti-clockwise the scald guard from Delta, and if you need to lower it, turn it clockwise.
Step 6: Replace the scald protection in its original location. Remember that the scald guard should fit perfectly in the cartridges holes since each space may produce a temperature difference of 5 – 16 degrees in the water.
Step 7: Wrap the plastic disk around the faucet cartridges and tighten the knob screw. You now understand how to accomplish it.
How can I remove the scald guard?
All faucets have a similar procedure for removing scald protection.
Step 1: Locate the screw opening sections of the faucet handle on the side.
Step 2: Remove the faucet cartridge to reveal the cartridge body, which will reveal a little plastic disk covering the scald protection.
Step 3: Here you have your scald guard by removing that disk.
Step 4: You’re done. Simply take it out if you wish to get rid of it.
If you want to install a valve with anti-scald, you’ll need all of the information above. Install it right away in the kitchen. You and another family member will be saved. Otherwise, you put your safety in danger.