If you can’t reach the glass of water or alarm clock on top of your nightstand, it simply means that it’s either too tall or too short for your bed.
What’s the point of having a nightstand if it’s not going to be used?
The question to consider is, “What is the best size for a nightstand?” Should the nightstand be the same size as the bed if you have a similar-sized bed?
Table of Contents
What is the best size nightstand for a king bed?
The best nightstand size for a king bed would be in the 20 to 40-inch width range, with a height of no more than 25 to 30 inches. There is no single best size, but 2 to 5 inches more or less than the mattress height is ideal.
Getting the correct dimensions of a compatible nightstand is one of the most important factors in finding one. It must be the same size as your bed and other bedroom furniture.
The nightstand you place beside your bed should not be too large or too small in comparison to the height and overall size of your bed. It not only detracts from the aesthetics of your bedroom, but it also makes other furniture appear out of proportion.
Furthermore, if you want to reach out your hand in the morning to get a glass of water or turn off your alarm clock, a nightstand that is too tall or too short will make it difficult for you.
While there are several compact sizes for smaller and medium-sized beds, imagining what size nightstand would look good with a king bed can be difficult.
Is a king-size bed nightstand wide and tall important?
In terms of height, the height of a king bed can vary slightly. Even so, the nightstand’s height should be in the range of 25 to 30 inches on average.
However, for a few California king beds that are enormous and measure 72 inches wide by 84 inches long, a taller nightstand may be required. In that case, a depth of 35 inches is appropriate.
In addition to the height of the nightstand, keep in mind that the mattress on the bed is at least 30 to 34 inches off the ground. In that case, the appropriate nightstand should be at least 26 to 28 inches tall.
Although the width of the nightstand is more dependent on the room dimension and position, it is most compatible if the width of the nightstand is around 30 inches on average.
However, if your room is larger and you want a larger, chest-style nightstand, you can choose nightstands up to 40 inches wide.
How wide and tall should the nightstand be for a queen bed?
The height and width of a nightstand should be compatible with a queen bed, just like a king-sized bed. Queen beds are slightly smaller than king beds, measuring 5 feet by 6 feet on average.
It will be difficult to use the nightstand to its full potential if it is too small in comparison to the enormous queen bed. Furthermore, the appearance of your bed set will be ruined.
The nightstand should be 30 to 40 inches wide for a 5 foot by 6-foot queen bed. The height should be 5 inches higher than the mattress or 5 inches lower than the mattress’s height.
How do you pick the right size nightstand?
Step 1: First and foremost, devise a strategy. In this plan, you’ll sketch out how many nightstands you’ll need, the material and color you’ll use, and the style you’ll consider.
Make a plan for how you will use the nightstand and what decorative items you will keep on top. Make a to-do list of measurements to take as well.
Step 2: If you’re starting from scratch, bring a room layout with you. You’ll need a measuring tape at this point. Determine the width and length of the bed.
More importantly, determine the bed’s height from the ground to the top surface of the mattress. Take one height measurement without the mattress thickness as well.
Step 3: Measure the length and width of the area that will be used as a nightstand. If any of the sides are against a wall, make sure there is enough space to fit the stand without making it look crowded.
Step 4: The height of the nightstand should be 2 to 5 inches lower than the height of the mattress. Make a final calculation of the nightstand’s height, width, and length and write it down.
How tall is the average nightstand?
A nightstand’s average height ranges from 24 to 28 inches. This is because the average height of a standard bed, measured from the ground to the top of the mattress, is 25 inches.
What is the typical size of a nightstand?
For a standard-sized bed, the average width of a nightstand should be 20 inches. The depth of such a nightstand should also be 20 inches. However, if the bed is larger, the nightstand can be as wide as 40 inches.
What size nightstand should I get for my platform bed?
Most platform beds are 18 inches tall with a mattress on top. A 15 to 16-inch elevation would be a good match if you want a nightstand that is shorter than the bed.
If you want a nightstand that is a little taller, a nightstand that is about 20 to 22 inches tall would be fine.
Experts recommend that your nightstand be a few inches higher or lower than the height of your bed plus mattress. Platform beds are shorter in height than other types of beds. Furthermore, platform beds do not have bed springs.
Should a nightstand be placed higher than a bed?
A nightstand does not have to be higher than the bed, but a taller one is easier to reach than a shorter one. If it is tall, it should be no more than 2 to 5 inches higher than the top of the mattress.
Should nightstands be placed lower than the bed?
The nightstand can be raised or lowered to match the height of the bed. If it is lower, it should not be lower than the bedside table by more than 2 to 3 inches. Lower nightstands, on the other hand, are more difficult to reach than slightly taller ones.
How do you match nightstands to a bed?
It is not difficult to match the nightstand to the bed. You can experiment with textures and colors as long as you have the correct size nightstand that fits the designated space.
If you want a unified look in your bedroom, such as an all-metal, all-wood, or all-white aesthetic, you can match the color and style of your nightstands to your bed frame.
A mismatched nightstand can be a great idea if you prefer more functional looks with a pop of color and different textures. For a wooden bed, for example, choose a nightstand with a glass surface or metal legs.
Making your nightstand match exactly with your bed, as designers frequently advise, makes your room look dull and uninteresting.
What should the price of a large nightstand be?
The price of nightstands varies a lot. Although the height or overall size of the nightstand may affect the price, the material of the furniture almost certainly has a much greater impact. If there are intricate details involved in the design, this can also raise the cost.
Nightstands range in price from $180 to $650, depending on the material used. A larger metal nightstand will be less expensive than a cabinet-style nightstand made of the highest quality wood. A large bachelor’s chest nightstand can also set you back at least $1000.
A marble-topped nightstand can cost up to $350, while a large farmhouse nightstand can cost around $300. Furthermore, depending on the size, cross-legged end tables made of solid wood or brass can cost up to $320.
Furthermore, the most expensive large nightstands are those with a more traditional design and are made of stone, marble, or solid wood. Some of the nightstands are made of rare materials and can cost between $600 and $1,200.
Nightstands with open or more airy aesthetics, as well as those with glass tops, are more affordable.
The overall size of your nightstand will affect both its usage and its appeal, whether it is a king-size bed, a queen-size bed, or any conventional bed.
A good nightstand should be a few inches taller or shorter than the bed, and its width should be proportional to the size of the room and bed.