How Does an Ottoman Bed Stay Down? Read this Simple Explanation

There is no doubt that ottoman beds can completely transform the look of your bedroom by providing storage underneath them. But have you ever wondered how the lid that covers your ottoman bed’s storage space stays closed?

So, to clear your doubts and concerns, you must read to the end of this article.

How Does an Ottoman Bed Stay Down?

The gas struts that support the lid or mattress weight essentially control whether your ottoman stays up or down. The gas-filled pistons prevent your bed from rising or falling inadvertently. However, if you put enough weight on top of those hydraulic pistons, your ottoman bed will stay down.

The gas pistons give the ottoman beds a solid foundation, which prevents the beds from moving around unnecessarily. As a result, there is little chance of any damage to the bed’s frame, screw, or spring, as well as any unavoidable accident.

The gas-filled struts function similarly to a hydraulic system in that you must apply pressure above them for them to descend.

This mechanism is also used in ottoman beds, so if you want your ottoman bed to stay down, you must put weight on the top of those gas struts.

Why won’t my ottoman bed collapse?

There are numerous reasons why the ottoman beds would not be removed. However, almost always, the ottoman bed would not drop due to systemic issues with the struts that held it in place.

Because the hydraulic pistons completely control the movement of the ottoman beds from down to up, here are some of the reasons why the gas pistons could not function:

Set the appropriate amount of weight.

You should first ensure that you have installed the recommended amount of weight on the ottoman as specified by the bed manufacturer. Many people purchase mattresses based on their personal preferences. However, this is not the proper way to do so.

You may also decide to buy a mattress that is lighter than the weight required for your ottoman bed to be lowered. There is not enough pressure from the mattress to make ottoman beds lower because they don’t get enough weight from the mattress.

It is unable to withstand the appropriate amount of pressure.

One of the most common reasons your ottoman bed won’t lower is that the gas pistons aren’t receiving enough pressure from above. As a result, you can either position the mattress or lower the bed by holding down on the gas-containing pistons with your hand.

There could be a pressure drop inside the gas struts.

If the gas struts begin to lose pressure, the ottoman beds will collapse. This raises the possibility of the ottoman beds collapsing at any time.

Internal complications

Gas pistons can also fail if they are damaged inside. This is because the mechanism that holds the gas pressure may become clogged.

As a result, the parts fly out at high speeds because there is suddenly no power to keep them in place. This means that you will have to use a lot of force to get the bed to fall.

How do you keep an ottoman bed in place?

There are a variety of options for keeping an ottoman bed in place. But first, you need to figure out what’s wrong with your ottoman bed. If you don’t, your solution might not work.

The following are some possible solutions to consider:

By putting down a mattress

One of the best solutions is to apply enough pressure to the gas struts, which is why your ottoman bed isn’t collapsing. As a result, putting the proper weight on top of the gas struts will cause the bed to stay down all of the time.

Placing the precise weight

You can buy the mattress based on the specifications listed on your ottoman bed. Because underweight or overloaded mattresses can cause the gas struts to fail, the ottoman bed may not be properly installed.

By ensuring that no external factor activates the gas struts,

External factors, such as over-extension, improper loading, and overheating, must be kept out of the way of the gas struts to keep them safe.

The person who installs all of the gas struts should inspect them for any potential flaws. Furthermore, the gas strut should be made to meet the manufacturer’s specifications, layout, and other rules about structure, efficiency, and operation, among other things.

Finally, experts say that before you try any of the solutions above, you should figure out what is preventing your bed from falling.

What should you do if your ottoman bed won’t stay up?

As previously stated, the main mechanism that keeps your ottoman bed down or up is the gas struts.

So, if your ottoman bed won’t stay up, it could be a problem with those gas struts, but it could also be for other reasons. Here are some possible solutions you can try to make your ottoman bed stay down:

Take out the mattress.

The weight of the mattress keeps the gas struts as low as possible because the gas struts must be locked into the correct position for the bed to stay down.

Similarly, to lock the gas struts in place, pull the lid of the ottoman bed as high as possible.

If the gas strut does not lock into place, you can try to pull the lid again by removing the mattress above it. Because the weight of the mattress can sometimes prevent the gas struts from rising,

By employing safety straps

Begin the upward movement with the safety strap to open the gas lift bed (s). The pistons will then do the majority of the heavy lifting, and the mattress will rise to reveal the storage room beneath it.

Some designs have two straps in the center, while others only have one strap in the center.

Look for issues with the gas struts.

One of the most common issues that prevent your ottoman from moving up and down is a malfunction in the gas struts. The high-pressure nitrogen gas is stored in the gas-storing pistons, and the pistons use this pressure to move your ottoman bed.

As a result, there’s a good chance that your ottoman bed won’t move up or down due to internal issues with those pistons. As a result, it is best to have your pistons checked out at your ottoman bed company’s service center regularly.

Is it possible to use an Ottoman lid without a mattress?

The gas struts are critical in keeping your ottoman bed upright or lowered. In both cases, the gas pistons require some external pressure to raise or lower the lid. That is why, without some weight, the ottoman lid will not stay down, necessitating the use of a mattress.

A lightweight mattress would be ideal for an ottoman bed.

On the other hand, memory foam and mattress in a box may be well worth the investment because they provide excellent comfort without putting undue strain on an ottoman bed’s lift mechanism.

What is the proper way to open and close an ottoman bed?

There are two simple methods for opening and closing an ottoman bed. However, you must be very careful when lifting because even a small mistake can have a big impact on your bed and even your health.

  • Opening: Opening an ottoman bed requires first removing the mattress and then pulling the lid as high as possible until the struts lock.
  • Closing: To close an ottoman bed, place the mattress back on top of the lid and then push it as far down as possible until the gas pistons lock.

Is it simple to lift ottoman beds?

Because of the gas struts that support the bed, the ottoman beds are very easy to lift. You can raise the bed using only your muscles, as the gas struts will assist you in lifting the lid.

Because of the extra weight on top of the lid, it can be difficult for someone to lift an ottoman bed. As a result, you can remove the mattress first and then try to lift the bed with your hand again.

However, if you are unable to lift the lid, you can use safety straps to begin the upward movement, as the gas pistons will do the rest of the heavy lifting.

How does the mattress stay in place on the ottoman bed?

On ottoman beds, a spring slat bed base or a non-slip top are typically used. These designs are intended to protect and hold the mattress in place, so you won’t have to worry about it slipping off as you raise the lid, and your headboard won’t be damaged.

On a side-opening ottoman bed, the bed frame on one side is taller than the other, which allows the mattress to stay in place when it is raised.

Is a special mattress required for an ottoman bed?

It is best to choose a mattress that fits your ottoman bed rather than a special mattress that makes you uncomfortable while sleeping.

As a result, a pocket spring mattress is a good choice because it can be used with a variety of base options and ottoman bed styles.

The pocket spring mattress is designed with total comfort in mind, making it the ideal bed for a restful night’s sleep. This type of spring mechanism, which is found inside mattresses, would be ideal for your ottoman bed.

A pocket spring bed fits all types of ottoman beds, but if that isn’t your style, you can buy those all-in-one packages that include the mattress as well as the ottoman beds.