Will Vinyl Flooring Stick to Plywood?

The plywood under a new vinyl floor acts as an underlayment over a wooden floor. However, many of you may be unaware of which sorts of vinyl flooring may be adhered to plywood, since there are several varieties of vinyl flooring available, such as vinyl tiles, vinyl planks, and so on.

If you’re thinking about placing vinyl flooring over plywood, you’ll naturally wonder if you can attach vinyl flooring to plywood as well.

So, via this post, you will learn about this significant issue and all of its explanations.

Will Vinyl Flooring Stick to Plywood?

Peel and stick vinyl tiles adhere to bare plywood. Plywood makes a smooth, uniform, and level subfloor for peel-and-stick vinyl tiles. However, before putting down peel and stick vinyl tile, make sure that the plywood is properly fastened to the floor and that it is clean.

Can Vinyl Flooring Be Installed Over Plywood?

Vinyl flooring may be installed on plywood. Plywood, in particular, is an excellent subfloor for the peel-and-stick sort of handy vinyl tiles. And those vinyl tiles may be installed on bare plywood underlayment.

Under the peel and stick vinyl tile flooring, plywood gives a consistent, level, and smooth appearance. Because plywood is put down in sheets and is porous, it makes an excellent subfloor.

However, before installing vinyl flooring on plywood, keep a few things in mind for underlayment. The main floor plywood must be clean and free of debris. It must also be firmly in place.

How Do You Apply Vinyl Flooring to Plywood?

If you’re worried about how to glue vinyl flooring to plywood, then stop! Because we’ve already told you how to do the simplest and most simple things.

Make the floor shiny.

Sticking vinyl flooring on a nice, clean plywood surface is essential. Because if there is dust or debris behind the flooring tiles, the glue will not adhere to the plywood underlayment.

Sweep, vacuum, and clean the plywood completely, leaving no residues or dirt/dust.

Preparing the Floor

Apply a latex primer to the plywood surface to improve the floor’s seal. Additionally, priming the floor will aid in the firm adhesion of the peel and stick vinyl tiles to the surface.

If the room where you’ll be installing vinyl stick tile is tiny, apply the priming using a handheld dye gun. To apply the primer in a big room, attach an extension pole to the paint roller’s handle. The primer should be applied in two coats.

Mix 3 parts water-based primer to 1 part water, mix them, and apply them to the floor.

Plywood Surface Measurement

To begin, measure your plywood surface and draw a square in the middle of it. It will assist you in methodically sticking the vinyl-stick tiles.

In the case of the laundry room, measurements should be lowered to line the vinyl stick tiles with the room’s entryway. Also, be sure to conceal the tiles under the green fake strips around the room’s perimeter.

The tiles must be acclimated.

Keep the peel and stick vinyl tiles in the rooms where they will be put for at least 24 hours before installing them. So, they can become used to the warmth of the room.

Set up the Peel and Stick Vinyl Tiles.

Simply peel and stick. Vinyl tiles come in a variety of styles, too. Some of them are malleable, while others are hard. Tiles should be installed in a staggered pattern so that two tiles can be aligned when installed.

Peel off the paper protecting the glue, position it on the measured square, place one edge on the plywood, gently install it, and then use force to adhere it to the board securely.

Remember that even if a small amount of glue falls off with the protecting paper, you will need to place a new tile over the plywood.


You may apply pressure to the tiles with a 75–100-pound floor roller to help them form a better contract with the plywood. In a short space, a kitchen rolling pin will suffice.

Is Underlayment Required for Vinyl Flooring on Plywood?

For vinyl flooring on plywood, you will not require an underlayment. Because the plywood acts as an underlayment underneath the peel and sticks vinyl flooring,

A subfloor will be required when installing peel and stick vinyl flooring tiles. And the plywood is the ideal subfloor for peel-and-stick vinyl tiles.

In this scenario, plywood serves as both a subfloor and an underlayment for vinyl stick tiles. As a result, no additional underlayment is necessary, nor is a moisture barrier.

The peel and stick vinyl flooring tiles may be installed directly on the plywood subfloor. But keep in mind that you must have completely clean and dust-free plywood flooring before applying the glue to the plywood.

How Should Plywood Be Prepared for Vinyl Flooring?

Preparing the plywood surface is a must-do task. Because it determines how well and firmly the peel and stick vinyl tiles adhere to the plywood subfloor/underlayment,

So, here’s a step-by-step guide to help you simply prepare your plywood flooring.

Examine the condition of the plywood subfloor and underlayment.

Take a step on the plywood flooring to get a sense of its present state. Then, using chalk, draw a circle around any loose or noisy locations.

Also, look carefully for any structural damage. The plywood flooring must be physically sound to hold the vinyl stick tiles.

Secure the squeaky/loose areas.

To ensure that the plywood flooring is securely fastened, use 1/4-inch nails and hammer them down on the loose or noisy locations. When the plywood rubs against loose pegs, it creates a squeaky floor. As a result, fixing it with fresh pegs will guarantee a solid grip.

Use wood leveling compounds.

Pour the wood leveling compound and water into a bucket and mix with a paddle mixer. While adding water, follow the instructions.

Then, using a dry well or a putty knife, apply a thin coating of the leveling compound mixture to the trenches between the plywood boards. Make sure the compound has completely covered the seams to keep moisture from getting in through the seams.

Allow the compound to cure for as long as it is completely dry.

The leveling compound should be smoothed.

Using a 100-grit hand sander, sand down the leveling compound-covered seams and smooth out the plywood flooring surface.

Make the floor shiny.

Vacuum the whole floor to remove any trash, dirt, dust, or residues.

Is it possible to apply peel-and-stick vinyl to plywood?

You can surely apply peel and stick vinyl on plywood. Plywood is often regarded as the best subfloor/underlayment material for peel-and-stick vinyl flooring tiles.

Over the main floor, plywood will create an even, level, and smooth-looking substrate for peel-and-stick vinyl flooring. You won’t even need any additional underlayment to put underneath the tiles since the plywood will serve as both a subfloor and an underlayment.

Simply peel off the protecting paper and apply the tiles straight to the plywood flooring. However, before installing the peel and stick vinyl tiles on the plywood flooring, make sure that the plywood is clean and dust-free.

What Is the Best Adhesive to Use When Gluing Vinyl to Plywood?

Additional adhesive may be required to bond down the vinyl flooring when placing it over plywood. So, in this area, we’ve provided you with five hand-picked adhesive names.

  • Vinyl, Fabric, and Plastic Repair Adhesive by Loctite
  • RH Adhesive HH-66 Industrial Strength Vinyl Cement Glue with Brush
  • Adhesive for Vinyl Flooring by Henry
  • Rhino Glue Professional Kit
  • Super Glue Gel Gorilla (7700104)

What Is the Best Way to Glue Vinyl to Plywood?

It is simple to glue your vinyl flooring to plywood. To start, fix any loose or noisy parts of the plywood flooring, level the plywood subfloor with leveling compound, smooth the floor, and dry the leveling compound.

Then, carefully clean the floor and measure the subfloor where the vinyl floor will be installed.

Allow the vinyl flooring tiles to acclimatize to the temperature of the room before peeling off the paper protecting the adhesive and sticking the tiles to the plywood subfloor/underlayment. Use a floor roller to firmly adhere the tiles to the plywood.

How Can You Make Cricut Vinyl Stick to Plywood?

It’s quite simple to get your Cricut vinyl to cling to plywood. Simply apply a coat of polyacrylic to the plywood surface. Minwax polyacrylic is a good choice since it is a water-based polyurethane that dries swiftly in 20 minutes.

Then, apply the vinyl pattern to the board and scrape it with a scraping instrument. And you’ll see the Cricut vinyl sticking to the board almost immediately.

What Kind of Flooring Can Be Installed Over Plywood?

The vast majority of engineered flooring can be placed over plywood. Vinyl flooring, for example, comes in a variety of styles, including peel and stick vinyl flooring tiles and others.

You may also lay laminate flooring over plywood, but you must first place the recommended foam cushion over the plywood subfloor.

Simply peel and stick. Vinyl flooring tiles will undoubtedly adhere to the plywood. Just make sure you have a nice and clean plywood subfloor/underlayment that is free of debris, residue, and grime.